TRD-Z DC Fuse(PV Special)

Short Description:

TRD-Z series DCfuse is mainly used for solar photovoltaic current junction box, solar panel photovoltaic components which may produce solar and circuit overload and short circuit current produced by the current feedback of the inverter shall be analyzed, to protect the solar photovoltaic component panel.

Products comply with:
◎GB 13539.1-2008 Low-voltage fuse-Part 1: Basic requirements
◎GB 13539.2-2008 Low-voltage fuse-Part 2: Supplementary requirements for fuses for use by authorized persons.
◎IEC 60269.1-2006 Low-voltage fuse-Part 1: General requirements
◎IEC 60269.2-2010 Low-voltage fuse-Part 2: Supplementary requirements for fuses for use by authorized persons(fuses mainly for industrial application)

Send email to us

Product Detail

Product Tags

Type and Meaning

Note: rated current:1、2、3、4、5、6、8、10、12、15、20、25、30A

Application Environment

Ambient temperature:-40℃~+90℃
◎ Elevation :≤3000m
◎ Relative humidity: the relative humidity of the air must not be above 50% at the max temperature of +40℃, but it may be higher at a lower temperature. The max average relative humidity must not be above 90% in the most humidity month in which the minimum average temperature is not above 25℃.Dew on the protectors due to temperature alteration should be removed.
◎ There must be not any explosive medium, and there must be not any gas which would corrode metal or any con-ducting dust which would destroy the insulation.
◎ Pollution level: level 3

Main Technical Parameters

TRD-Z	Technical parameters
Rated current(A)	1、2、3、4、5、6、8、10、12、15、20、25、30
Rated operating voltage (v)	DC1000
Rated insulation voltage(v)	DC1500
Rated short-circuit breaking capacity	25kA
Pole numbers	1P
Installation method	TH-35 Rail installation