PSDQ Dual Power Automatic Transfer Switch (Two Sections, Three Sections)

Short Description:

Send email to us

Product Detail

Product Tags

GENERAL

Model and Meaning

Technical Requirement

◆ In the automatic, when the common power supply, under-voltage, over-voltage, loss of pressure transferred to the standby power supply. When the standby power appeared in the same failure, converted to double position, display screen will display and alarm automatically at the same time.

◆ LCD screen is protecting in the 30s, on the button for the first time display screen will display, the second time can enter the settings, enter setup requires a password input.

◆ When the artificial set garbled (crash), the reset button reset to set the value of silence.

◆ When the controller is arranged in the automatic, manual position, pressing the control panel double key display double, but not alarm.

◆ The controller sets delay switching time, when there is a power failure recovery in the value set, dual power supply without switching, opposite, and switching.

Intelligent Controller Settings

Main Technical Parameters

The Wiring Drawing of Standard Two Sections and Working State

The Wiring Drawing of Standard Three Sections and Working State

The Method of Artificial Manual Operating and Note

Company guarantee the switching performance of products electric operation, but for manual operation because of the individual differences, opening and closing force, speed is different,so can not guarantee. Opening and closing or opening and closing with load in manual operation function, the contact point will have to produce. Such asthe need for manual please apply in the following cases, other occasions avoid manual operation.

◎Safe without operating power.

◎Do the inspection of the operating mechanism, and the contact part.

◎When producing obstacles, it can t act.

Note: the manual operating power supply must be in the "OFF" case.